The origin of the vertical carton erector machine machine business of quanchang company

Qunchang was founded in Taiwan in 1983.Has been around the shrink packaging and after packaging to serve customers.So our service philosophy is：After the packaging service provider.Since we are a service company.The main purpose is to provide customers with the solution of back packing.So in the process of overall operation.There are a lot of equipments related to thick packing in design.Originally, some of our equipment went through the supply chain, and the company did not carry out its own body.The matching process should be integrated with the suppliers in the supply chain, including the integration of ideas, product design and service concept, so the matching process is extremely difficult.And because the carton products after the packaging accounted for more than 90% of the total packaging.So the vertical carton erector machine, folding and sealing machine, packing machine are very important equipment.

vertical carton erector machine  was the first one we started to design and produce.We split the machine into two vertical carton erector machine.One is the standard box opener.It is for the vertical carton erector machine when the customer is not connected.Personnel can see the operation of the machine at any time.The other is the vertical carton erector machine in the wired state.This kind of vertical carton erector machine has a lot of detection function:No tape detection、Broken tape detection、Unsealed tape detection.These are the renewal designs that we have realized in the actual operation process.It is convenient for the machine to be more automatic.

Automatic vertical carton erector machine brings convenience to customers.

First take a carton that has been formed to be unpacked.Turn the belt width adjustment hand wheel(The belt width becomes narrower clockwise,The width of the belt becomes wider in the counter clockwise direction.)Make the width of the discharge belt equal to the width of the carton.

Next, turn the carton to take the adjusting hand wheel(Forward clockwise.After the other direction.)When the suction cup is at the limit position:The surface of the suction cup is parallel to the surface of the belt.

Cartons that have not yet been opened.It is placed on the lower edge of the block as the benchmark.Adjust the height and width of the storage tank.They are the height and width of the unformed carton.And adjust the taper adjustment.Let it line up with the fold line of the carton.

Turn the carton adjusting hand.Adjust to the pusher bar、The taper adjustment is fast、The cartons are now in the same line.

Adjust the suction cup to the appropriate position according to the size of the carton.Finally, the carton which has not been formed is put into the storage tank.

Make sure that the power and air supply have been supplied to the vertical carton erector machine machine.

Turn on the power switch of the circuit breaker in sequence.Make sure the emergency stop button is not depressed.Turn on the machine.The automatic vertical carton erector machine machine is on.

Next time, I’d like to share with you another vertical carton erector machine.This is one of the vertical carton erector machines.There is also a horizontal box opener.